MASSO G3 is the most stable, reliable and easy-to-use CNC controller money can buy. Escape the reliability issues of PC-based controllers, which are vulnerable to external design flaws, incompatible software updates and viruses. No need to worry about installing drivers or motion cards, just wire the MASSO to your motor drives and enter calibration values to start machining.
SABER2232 CNC Machine - Masso Controller
2.2x3.2m CNC Machine Specs:
Rack & Pinion CNC Machine | High-Speed, High-Precision Full Sheet CNC Router
Boost your production with the CNC Basix Rack & Pinion CNC Machine, engineered for high-speed cutting, precision accuracy, and industrial reliability. Built on a rigid square tubing steel frame, this CNC router is designed to handle demanding, high-volume environments with ease.
Precision Engineering for Maximum Performance
The machine features 12mm aluminium Y-axis brackets, eliminating flex and unwanted movement. This ensures consistent cutting accuracy and repeatability, even during intensive production runs.
Full Sheet Cutting Capability (1830 x 2750mm)
Cut full-size boards without repositioning. The large working area is perfect for:
Wood sheets
Aluminium panels
Perspex (acrylic)
Composite materials
This maximizes efficiency and reduces production time.
High-Speed Rack & Pinion Drive System
The rack & pinion system allows for:
Faster cutting speeds
Smooth motion control
Reliable long-term performance
Perfect for businesses needing high output without sacrificing precision.
Cutting Performance
4–6mm depth per pass (depending on material and tooling)
Excellent results across soft and rigid materials
Optimized for production environments
Reliable Control System
Proven and stable control using Masso, delivering:
Consistent machine operation
Easy setup and control
Industry-trusted reliability
Advanced Homing & Limit System
Equipped with 7 limit switches (A+, A-, Y+, Y-, X+, X-, Z+), enabling:
Accurate homing
Auto squaring for perfect alignment
Soft limits for safety
Full axis protection
Built for Customization & Upgrades
This CNC machine is designed with flexibility in mind. Upgrade options include:
Electronic enhancements
Mechanical improvements
Custom configurations to suit your workflow
2.2x3.2m CNC Machine Features:
Footprint: 2200mm x 3200mm at the base *Stock size measured from base
Work Area: 1860mm x 2780mm x 200mm *Stock size
Cutting depth 100mm Depending on type of bit used (Total of 200mm Z-Axis Travel)
Open ends allow pass through of longer materials.
50x50x1.6mm 800mm high Square Tubing frame/table painted black
Jogging speed 18 000 - 24 000mm/min
Cutting speed 1000 - 6000mm/min - depending on cutting bit and material used
2x 3.175mm & 2x 6mm cutting bits
Collets 3mm, 4mm, 6mm & 8mm
Electronics controller box
32" Screen, wireless keyboard and mouse
Full HGR20 linear rail management with rack & pinion for X axis with cable drag chains
Full HGR20 linear rail management with rack & pinion for Y axis with cable drag chains
Full HGR15 linear rail management with SFU1605 ball screw for Z axis with cable drag chains
80x120 Aluminium extrusions for Y and X axis
2.2kw Air Cooled Spindle & VFD Kit
Manual Speed Controlled between 12 000 RPM – 24 000 RPM.
Full limit switches, hard stop
Auto homing and auto squaring
User Setup G54 - G59 Capability
*The machine comes with a square tubing table with a MDF wasteboard including fastening clamps.
Requirements:
Personal computer or Laptop running Windows 7, 8 or 10 for designing and saving of G-Code
USB Memory Stick
Easel 30 Days Free Trial - Online Cloud Based App used for designing and cutting process. R450 per month or R4000 for 12 months - depending on rand/USD exchange rate
Alternative designing software:
Vectric - Basic training available at additional costs
Fusion 360 - Basic training available at additional costs
Mechanical Specifications:
4x Nema 34 stepper motors 4.5N.m
Full HGR20 linear rail management with rack & pinion for X axis with cable drag chains
Full HGR20 linear rail management with rack & pinion for Y axis with cable drag chains
Full HGR15 linear rail management with SFU1605 ball screw for Z axis with cable drag chains
Dual motors on Y axis.
7x Proximity Sensors - 2 on each axis (A+, A-, Y+, Y-, X+, X-, Z+)
Repeatability 0.05mm
Accuracy 0.05-0.1mm
Electronics Specifications:
Masso 3 Axis Stepper Motor Driver Controller Board
24V 17A 400W Power Supply
230v AC Power Socket - Power Cable Provided
Emergency Stop Button
All connecting fittings and cables
MASSO G3
Powerful. Stable. Guaranteed.
With MASSO G3 you get:
- Compulsory delivery, setup and minimal training of the machine at additional costs to the customer - within South Africa only.
- Delivery Time For Gauteng And Surrounding Provinces 3-5 Weeks Lead Time
- Delivery Time For Northern, Eastern & Western Cape 5-8 Weeks Lead Time
The machine can be upgraded with the following: 2.2kW Water Cooled Spindle Kit | 3kW Air Cooled Spindle Kit | MPG Pendant
UPGRADES:
2.2kW Water Cooled Spindle Kit Specification:
2.2kW Water-cooled spindle kit. This kit includes the spindle, aluminium mounting bracket, VFD, 4 additional collets (3mm, 4mm, 6mm & 8mm), water pump and 6m of water tubing. The only thing you will need to run the spindle is the cable between the spindle and the VFD, the power cable to the VFD and a water bath for the water pump.
2.2kW Water-cooled Spindle for CNC machine. This is a 3-phase spindle designed to work with a 2.2kW Variable Frequency Drive (VFD). It has a built in ER20 Collet holder which can mount from 1mm to 13mm cutting bit shaft sizes. The spindle is mounted to the gantry of the CNC machine with an aluminium bracket. The rotor of the spindle is mounted with 2 bearings at the bottom of the spindle and 2 bearings at the the top, to ensure a long service life. This spindle is perfect for milling and engraving of wood, plastic, foam, aluminium, brass, steel and even stone.
Specification:
- Diameter: 80mm
- Power: 2.2KW
- Current: 10A
- Voltage: 220V
- Frequency: 0-400Hz
- Speed: 10-24000rpm
- Collet Size: ER20
- Cooling: Water Cooled
- Runout: 0.003mm - 0.005mm
- Bearings: C7002 x 2, C7005 x 2
- Collet size in spindle: 1/8' (3.175mm)
- Additional collet sizes: 3mm, 4mm, 6mm & 8mm
2.2kW Variable Frequency Drive (VFD) to drive a CNC machine spindle. This drive can be controlled via hand or via a controller board. There are a wide range of settings to fine tune the way the spindle is controlled and also comes with a manual with more details of each setting. The VFD run off single phase 220V AC and the output is also 220V provided to the spindle. It also comes with self controlled built in cooling which switches on when required.
- Power: 2.2KW
- Input Voltage: 220V AC (Single Phase)
- Output Voltage: 220V
- Output Current: 10A
- Input Frequency:50-60Hz
- Output Frequency:0-400Hz
- Input phase: Single phase
- Output phase: 3 phase
- Size: 170 x 125 x 163mm
- Control: By hand via built in control panel or via digital signal from controller board
3kW Water Cooled Spindle Kit Specification:
This is the CNC Spindle Motor Air Cooled 3KW Kit. The CNC Spindle motor Air Cooled Spindle 3KW has 4 Bearings & 3.0kw VFD/inverter variable frequency driver spindle speed controls. This is the squared spindle design. It is used for Milling / Engraving and various types of projects.
Product Specs:
- Material: Stainless steel jacket, copper coil!
- Application: Milling / Engraving
- Cooling: Air cooling mode
- Power Interface: Optional GX16 air plug, there are marked 1234,123 were connected to the inverter power supply (U, V, W), 4 connected inverter ground
- Power: 3KW
- Voltage: 220V
- Current: 10A
- Runout Off: 0.003-0.005mm
- Diameter(mm):105
- Bearing type: 4 Bearing ,Angular contact bearings,P4 grade,2X7005C P4 DT and 2X7003C P4
- Collet: ER20
- Air Cooling ER20 collet chunk
- Grease Lubrication
- Phase: 3HP
- Package Weight: 11.0 Kg
VFD Specification:
- Input Voltage: 220V(+/-15%) ,We also stock 380V(+/-15%), please contact us.
- Output Voltage: 220VAC
- Input Frequency: 48-63 Hz
- Output Frequency: 0-400 Hz
- Input Phase: 1 or 3 phase
- Output Phase: 3 phase
MPG Pendant Specification:
High quality MPG Pendant for CNC machines. This is a general wired CNC pendant that can control up to 4 Axis CNC machines. It is made from a tough soft touch plastic with metal casing on the inside. The buttons and dial have a solid and quality feel to it which makes it easy to control your CNC machine. On the pendant you can select the axis you want to move and the size of increments you want to move at with the dial. It also includes a clip to hang the pendant when not in use and a magnet backside to be able to attach the pendant to any metallic surface.
This pendant is a generic MPG pendant. We sell it prewired for the DDCS V3.1 CNC controller.
Specifications:
- Number of axis: 4 axis
- Increments: 1x, 10x and 100x
- Emergency stop: Yes
- Cable length: 2m with pigtail section for extra stretch.