AXYZ1010B CNC Machine - Arduino Controller @ CNC Basix

AXYZ1010B CNC Machine - Arduino Controller

  • Sale
  • Regular price
    R 58,500.00
Shipping calculated at checkout.


AXYZ1010B CNC Machine - Arduino Controller

1x1m CNC Machine Specs:

This machine is part of our production range, this machine is perfect for high work load and is perfect to cut material for extremely long hours. This Machine is perfect to cut aluminium, perspex, wood and other materials with high accuracy. Very good reliability with the Arduino Controller combination with it's ridged frame and aluminium extrusions. With many upgradable options, electronically or mechanically like 1.5kw, 2.2kw, 3kw air cooled or water cooled spindle kits, 3kw water cooled automatic tool changer spindle kits or you can add a table for the machine, you are in the front seat to get your ideal CNC Machine built to your requirements.

1x1m CNC Machine Features: 

Footprint: 985mm x 1020mm at the base *Stock size measured from base

Work Area: 740mm x 740mm x 100mm *Stock size

Cutting depth 50mm Depending on type of bit used.

Open ends allow pass through of longer materials.

All aluminium frame and 3mm steel front and back panels

5 cutting bits (1mm, 1.5mm, 2mm, 2.5mm, 3mm)

Collets 3mm, 6mm

Electronics controller box with USB cable connection (cable included)

Full HGR15 linear rail management with SFU2010 ball screws for X & Y axis with cable drag chains

Lead screw and HGR15 linear rail management for Z axis

Makita RT0700C 700w Router (12 month warranty from any Makita dealer) 6 months warranty

Manual Speed Controlled between 12 000 RPM – 30 000 RPM.

Maximum jog rate is 2000 mm/min

Maximum feed rate is 1000 mm/min

*The machine comes with a MDF wasteboard including fastening clamps.

*Please note when adding UPGRADES to your order that the first item - the machine must be selected, without the machine the upgrade options and prices will not be valid.

Requirements: 

Personal computer or Laptop running Windows 7, 8 or 10.

USB port on computer

Controlling Software: 

Easel

Open Builds

Additional Designing Software:

Ink Scape

Fusion 360


Specifications: 

1x Nema 23 closed loop stepper motors 2.2Nm

3x Nema 34 closed loop stepper motors 8.5Nm

4x Closed Loop Motion Controllers

HGR15 linear rails and SFU2010 ball screws on X & Y axis.

Dual motors on Y axis.

T8 8mm lead screw and HGR15 linear rails on Z axis 

Configured resolution: less than 0.1mm

65mm Router Spindle Mount (suitable for Makita RT0700C). 

 

Electronics Specifications:

4 Axis Stepper Motor Driver Controller Board.

24V 10A 250W Power Supply

230v AC Power Socket - Power Cable Provided

Emergency Stop Button

USB Connection - USB Cable Provided

All connecting fittings and cables

 

  • Compulsory delivery, setup and minimal training of the machine at additional costs to the customer - within South Africa only.
  • Delivery Time For Gauteng And Surrounding Provinces 3-5 Weeks Lead Time
  • Delivery Time For Northern, Eastern & Western Cape 5-8 Weeks Lead Time

The machine can be upgraded with the following: 1.5kw Air Cooled Spindle Kit | 1.5kw Water Cooled Spindle Kit | 2.2kw Air Cooled Spindle Kit | 2.2kw Water Cooled Spindle Kit | 3kw Air Cooled Spindle Kit | 3kw Water Cooled Spindle Kit | 3kw Water Cooled ATC Spindle Kit | Table 

Upgrades includes the machines price with the upgrade item/additional item.

UPGRADES:

    1.5kW Air Cooled Spindle Kit Specification:

    1.5kW Air cooled spindle kit.  This kit includes the spindle, aluminium mounting bracket, VFD and 4 additional collets (2mm, 3mm, 4mm & 6mm).  

    • Diameter: 65mm
    • Power: 1.5kW
    • Current: 7A
    • Voltage: 220V
    • Frequency: 0-400Hz
    • Speed: 10-24000rpm
    • Collet Size: ER11
    • Cooling: Air Cooled
    • Runout: 0.003mm - 0.005mm
    • Bearings: C7002 x 2, C7002 x 2
    • Collet size in spindle: 1/8' (3.175mm)
    • Additional collet sizes: 2mm, 3mm, 4mm & 6mm
    • Power: 1.5KW
    • Input Voltage: 220V AC (Single Phase)
    • Output Voltage: 220V 
    • Output Current: 7A
    • Input Frequency:50-60Hz
    • Output Frequency:0-400Hz
    • Input phase: Single phase
    • Output phase: 3 phase
    • Size: 170 x 125 x 163mm
    • Control: By hand via built in control panel or via digital signal from controller board

     1.5kW Water Cooled Spindle Kit Specification:

    1.5kW Water-cooled spindle kit.  This kit includes the spindle, aluminium mounting bracket, VFD, 4 additional collets (2mm, 3mm, 4mm & 6mm), water pump and 6m of water tubing. 

    • Diameter: 65mm
    • Power: 1.5kW
    • Current: 7A
    • Voltage: 220V
    • Frequency: 0-400Hz
    • Speed: 10-24000rpm
    • Collet Size: ER11
    • Cooling: Water Cooled
    • Runout: 0.003mm - 0.005mm
    • Bearings: C7002 x 2, C7002 x 2
    • Collet size in spindle: 1/8' (3.175mm)
    • Additional collet sizes: 2mm, 3mm, 4mm & 6mm
    • Power: 1.5KW
    • Input Voltage: 220V AC (Single Phase)
    • Output Voltage: 220V 
    • Output Current: 7A
    • Input Frequency:50-60Hz
    • Output Frequency:0-400Hz
    • Input phase: Single phase
    • Output phase: 3 phase
    • Size: 170 x 125 x 163mm
    • Control: By hand via built in control panel or via digital signal from controller board

    2.2kW Air Cooled Spindle Kit Specification:

    2.2kW Air cooled spindle kit.  This kit includes the spindle, aluminium mounting bracket, VFD and 4 additional collets (3mm, 4mm, 6mm & 8mm).  

    • Diameter: 80mm
    • Power: 2.2KW
    • Current: 10A
    • Voltage: 220V
    • Frequency: 0-400Hz
    • Speed: 10-24000rpm
    • Collet Size: ER20
    • Cooling: Air Cooled
    • Runout: 0.003mm - 0.005mm
    • Bearings: C7002 x 2, C7005 x 2
    • Collet size in spindle: 1/8' (3.175mm)
    • Additional collet sizes: 3mm, 4mm, 6mm & 8mm
    • Power: 2.2KW
    • Input Voltage: 220V AC (Single Phase)
    • Output Voltage: 220V 
    • Output Current: 10A
    • Input Frequency:50-60Hz
    • Output Frequency:0-400Hz
    • Input phase: Single phase
    • Output phase: 3 phase
    • Size: 170 x 125 x 163mm
    • Control: By hand via built in control panel or via digital signal from controller board

    2.2kW Water Cooled Spindle Kit Specification:

    2.2kW Water-cooled spindle kit.  This kit includes the spindle, aluminium mounting bracket, VFD, 4 additional collets (3mm, 4mm, 6mm & 8mm), water pump and 6m of water tubing.  

    • Diameter: 80mm
    • Power: 2.2KW
    • Current: 10A
    • Voltage: 220V
    • Frequency: 0-400Hz
    • Speed: 10-24000rpm
    • Collet Size: ER20
    • Cooling: Air Cooled
    • Runout: 0.003mm - 0.005mm
    • Bearings: C7002 x 2, C7005 x 2
    • Collet size in spindle: 1/8' (3.175mm)
    • Additional collet sizes: 3mm, 4mm, 6mm & 8mm
    • Power: 2.2KW
    • Input Voltage: 220V AC (Single Phase)
    • Output Voltage: 220V 
    • Output Current: 10A
    • Input Frequency:50-60Hz
    • Output Frequency:0-400Hz
    • Input phase: Single phase
    • Output phase: 3 phase
    • Size: 170 x 125 x 163mm
    • Control: By hand via built in control panel or via digital signal from controller board

    3kw Air Cooled Spindle Kit:

    3kW Air cooled spindle kit. This kit includes the spindle, aluminium mounting bracket, VFD and 4 additional collets (3mm, 4mm, 6mm & 8mm). The only thing you will need to run the spindle is the cable between the spindle and the VFD as well as the power cable to the VFD.

    3kW Air-cooled Spindle for CNC machine. This is a 3-phase spindle designed to work with a 3kW or bigger Variable Frequency Drive (VFD). It has a built in ER20 Collet holder which can mount from 1mm to 13mm cutting bit shaft sizes. The rotor of the spindle is mounted with 2 bearings at the bottom of the spindle and 2 bearings at the the top, to ensure a long service life. The spindle is mounted to the gantry of the CNC machine with an aluminium bracket (sold separately). This spindle is perfect for milling and engraving of wood, plastic, foam, aluminium, brass, steel and even stone.

    • Diameter: 100mm
    • Power: 3KW
    • Current: 10A
    • Voltage: 220V
    • Frequency: 0-300Hz
    • Speed: 10-18000rpm
    • Collet Size: ER20
    • Cooling: Air Cooled
    • Runout: 0.003mm - 0.005mm
    • Bearings: C7003 & C7005
    • Collet size in spindle: 1/8' (3.175mm)
    • Additional collet sizes: 3mm, 4mm, 6mm & 8mm
    3.7kW Variable Frequency Drive (VFD) to drive a CNC machine spindle. This drive can be controlled via hand or via a controller board. There are a wide range of settings to fine tune the way the spindle is controlled and also comes with a manual with more details of each setting. The VFD run off single phase 220V AC and the output is also 220V provided to the spindle. It also comes with self controlled built in cooling which switches on when required.
      • Power: 3.7KW
      • Input Voltage: 220V AC (Single Phase)
      • Output Voltage: 220V
      • Output Current: 17A
      • Input Frequency:50-60Hz
      • Output Frequency:0-400Hz
      • Input phase: Single phase
      • Output phase: 3 phase
      • Size: 220 x 120 x 140mm
      • Control: By hand via built in control panel or via digital signal from controller board

    3kw Water Cooled Spindle Kit:

    3kW Water-cooled spindle kit. This kit includes the spindle, aluminium mounting bracket, VFD, 4 additional collets (3mm, 4mm, 6mm & 8mm), water pump and 6m of water tubing. The only thing you will need to run the spindle is the cable between the spindle and the VFD, the power cable to the VFD and a water bath for the water pump.

    3kW Water-cooled Spindle for CNC machine. This is a 3-phase spindle designed to work with a 3kW or bigger Variable Frequency Drive (VFD). It has a built in ER20 Collet holder which can mount from 1mm to 13mm cutting bit shaft sizes. The rotor of the spindle is mounted with 2 bearings at the bottom of the spindle and 2 bearings at the the top, to ensure a long service life. The spindle is mounted to the gantry of the CNC machine with an aluminium bracket (sold separately). This spindle is perfect for milling and engraving of wood, plastic, foam, aluminium, brass, steel and even stone.

    • Diameter: 100mm
    • Power: 3KW
    • Current: 10A
    • Voltage: 220V
    • Frequency: 0-400Hz
    • Speed: 10-24000rpm
    • Collet Size: ER20
    • Cooling: Water Cooled
    • Runout: 0.003mm - 0.005mm
    • Bearings: C7003 x 2, C7005 x 2
    • Collet size in spindle: 1/8' (3.175mm)
    • Additional collet sizes: 3mm, 4mm, 6mm & 8mm
    3.7kW Variable Frequency Drive (VFD) to drive a CNC machine spindle. This drive can be controlled via hand or via a controller board. There are a wide range of settings to fine tune the way the spindle is controlled and also comes with a manual with more details of each setting. The VFD run off single phase 220V AC and the output is also 220V provided to the spindle. It also comes with self controlled built in cooling which switches on when required.
      • Power: 3.7KW
      • Input Voltage: 220V AC (Single Phase)
      • Output Voltage: 220V
      • Output Current: 17A
      • Input Frequency:50-60Hz
      • Output Frequency:0-400Hz
      • Input phase: Single phase
      • Output phase: 3 phase
      • Size: 220 x 120 x 140mm
      • Control: By hand via built in control panel or via digital signal from controller board

    3kw Water Cooled ATC Spindle Kit, 50L Compressor, CW3-000 Water Chiller:

    3kW Water Cooled Automatic Tool Change (ATC) Spindle for CNC machine. This is a 3-phase spindle designed to work with a 3kW or bigger Variable Frequency Drive (VFD). It is designed for the BT30 tool change handles and comes with 6 x BT30 handle for 3x 3mm & 3x6mm ER20 collet and 1 x pull stud.  The ER20 collet sizes range from 1mm to 13mm.

    The tool change mechanism is operated pneumatically and an included proximity sensor is to be mounted at the back of the spindle to monitor if the ATC mechanism is engaged or not.

      • Diameter: 100mm
      • Power: 3kW
      • Voltage: 220V
      • Rated frequency: 400Hz
      • Maximum frequency: 1200Hz
      • Number of poles: 8
      • Rated speed: 6000rpm (@ 400Hz)
      • ATC Handle: BT30
      • Collet Size: ER20
      • Cooling: Water Cooled
      • Runout: 0.003mm - 0.005mm
      • Brand: Lusintun
    3.7kW Variable Frequency Drive (VFD) to drive a CNC machine spindle. This drive can be controlled via hand or via a controller board. There is a wide range of settings to fine tune the way the spindle is controlled and also comes with a manual with more details of each setting. The VFD runs off single phase 220V AC and the output provided to the spindle is also 220V. It comes with self controlled built in cooling which switches on when required.
    • Power: 3.7kW
    • Input Voltage: 220V AC (Single Phase)
    • Output Voltage: 220V
    • Output Current: 17A
    • Input Frequency:50-60Hz
    • Output Frequency:0-400Hz
    • Input phase: Single phase
    • Output phase: 3 phase
    • Size: 220 x 116 x 140mm
    • Control: By hand via built in control panel or via digital signal from controller board

    50L Compressor 0.75kw (1Hp):

    • Tank Capacity: 50 L
    • Motor Output: 750 W (1 HP)
    • Outlet Air Flow: 2.1 CFM (60 L/MIN)
    • Max Tank Pressure: 7 BAR (102 PSI)
    • Amperage: 10 A
    • Compressor Type: Silent Oil Free
    • RPM: 1 450 RPM
    • Voltage: 230 V @ 50 HZ
    • Phase: Single Phase

    CW-3000 Water Chiller:

    CW-3000 industrial water chiller used to cool laser tubes or CNC spindles. The CW-3000 chiller uses a radiator and a fan to cool the water to the environment. The water is cooled to to a set temperature to ensure a constant working temperature. These chillers are recommended for a 80W and up laser tube when doing long production runs.

      • Model Number: CW-3000AG
      • Input Voltage: 220-240V
      • Frequency: 50Hz
      • Current: 0.7A (Maximum)
      • Maximum pump Lift: 10m
      • Nett Weight: 12kg (Approx)
      • Machine size: 490 x 270 x 380mm (L x W x H)

    Table Specifications:

    • 50x50x2mm Square Tubing
    • Height of table: 900mm
    • Table painted black
    • Adjustable feet
    • Please note the pictures are for illustrative purposes only, final product may vary depending on the type and length of the machine selected