AXYZ1010B CNC Machine - Mach3 Controller

1x1m CNC Machine Specs:

This machine is part of our production range, this machine is perfect for high work load and is perfect to cut material for extremely long hours. This Machine is perfect to cut aluminium, perspex, wood and other materials with high accuracy. This machine can cut 4-6mm per pass depending on the density of the material and the type of cutting bit used. Very good reliability with the Mach3 Controller combination with it's ridged frame and aluminium extrusions. Including seven limit switches A+, A-, Y+, Y-, X+, X- and Z+ for the use as limits, homing and soft limits. With many upgradable options, electronically or mechanically like 1.5kw, 2.2kw, 3kw air cooled or water cooled spindle kits, 3kw water cooled automatic tool changer spindle kits or you can add a table for the machine, you are in the front seat to get your ideal CNC Machine built to your requirements.

1x1m CNC Machine Features:

Footprint: 985mm x 1020mm at the base *Stock size measured from base

Work Area: 740mm x 740mm x 100mm *Stock size

Cutting depth 50mm Depending on type of bit used.

Open ends allow pass through of longer materials.

All aluminium frame and 3mm steel front and back panels

5 cutting bits (1mm, 1.5mm, 2mm, 2.5mm, 3mm)

Collets 3mm, 6mm

Electronics controller box with 3m USB cable connection (cable included)

Full HGR 15 linear rail management with SFU20 ball screws for X & Y axis with cable drag chains

Lead screw and HGR15 linear rail management for Z axis

Makita RT0700C 700w Router (12 month warranty from any Makita dealer) 6 months warranty

Manual Speed Controlled between 12 000 RPM – 30 000 RPM.

Maximum jog rate is 2000 mm/min

Maximum feed rate is 1000 mm/min

Auto homing and auto squaring

*The machine comes with a MDF wasteboard including fastening clamps.

*Please note when adding UPGRADES to your order that the first item - the machine must be selected, without the machine the upgrade options and prices will not be valid.

Requirements:

Personal computer or Laptop running Windows 7, 8 or 10.

USB port on computer

Mach3 Operating Software & License Included

Easel 30 Days Free Trial - Online Cloud Based App used for designing and cutting process. R450 per month or R4000 for 12 months - depending on rand/USD exchange rate

Alternative designing software:

Vectric - Basic training available at additional costs

Fusion 360 - Basic training available at additional costs

Mechanical Specifications:

1x Nema 23 closed loop stepper motors 2.2Nm

3x Nema 34 closed loop stepper motors 8.5Nm

4x Closed Loop Motion Controllers

HGR15 linear rails and SFU2010 ball screws on X & Y axis.

Dual motors on Y axis.

T8 8mm lead screw and HGR15 linear rails on Z axis

7x Proximity Sensors - 2 on each axis (A+, A-, Y+, Y-, X+, X-, Z+)

Configured resolution: less than 0.1mm

65mm Router Spindle Mount (suitable for Makita RT0700C).

Electronics Specifications:

4 Axis Stepper Motor Driver Controller Board - Mach3 Controller Board with Mach3 License Key.

24V 10A 250W Power Supply

230v AC Power Socket - Power Cable Provided

Emergency Stop Button

Including all connecting fittings, cables, z-probe, a set of 5 fish tail cutting bits 1, 1.5, 2, 2.5 and 3mm, mostly used for wood engraving and cutting, 4x fastening clamps and bolts, with memory stick with the software.

Compulsory delivery, setup and minimal training of the machine at additional costs to the customer - within South Africa only.
Delivery Time For Gauteng And Surrounding Provinces 3-5 Weeks Lead Time
Delivery Time For Northern, Eastern & Western Cape 5-8 Weeks Lead Time

Upgrades includes the machines price with the upgrade item/additional item.

UPGRADES:

1.5kW Air Cooled Spindle Kit Specification:

1.5kW Air cooled spindle kit. This kit includes the spindle, aluminium mounting bracket, VFD and 4 additional collets (2mm, 3mm, 4mm & 6mm).

Diameter: 65mm
Power: 1.5kW
Current: 7A
Voltage: 220V
Frequency: 0-400Hz
Speed: 10-24000rpm
Collet Size: ER11
Cooling: Air Cooled
Runout: 0.003mm - 0.005mm
Bearings: C7002 x 2, C7002 x 2
Collet size in spindle: 1/8' (3.175mm)
Additional collet sizes: 2mm, 3mm, 4mm & 6mm

VFD Specification:

Power: 1.5KW
Input Voltage: 220V AC (Single Phase)
Output Voltage: 220V
Output Current: 7A
Input Frequency:50-60Hz
Output Frequency:0-400Hz
Input phase: Single phase
Output phase: 3 phase
Size: 170 x 125 x 163mm
Control: By hand via built in control panel or via digital signal from controller board

1.5kW Water Cooled Spindle Kit Specification:

1.5kW Water-cooled spindle kit. This kit includes the spindle, aluminium mounting bracket, VFD, 4 additional collets (2mm, 3mm, 4mm & 6mm), water pump and 6m of water tubing.

Diameter: 65mm
Power: 1.5kW
Current: 7A
Voltage: 220V
Frequency: 0-400Hz
Speed: 10-24000rpm
Collet Size: ER11
Cooling: Water Cooled
Runout: 0.003mm - 0.005mm
Bearings: C7002 x 2, C7002 x 2
Collet size in spindle: 1/8' (3.175mm)
Additional collet sizes: 2mm, 3mm, 4mm & 6mm

VFD Specification:

Power: 1.5KW
Input Voltage: 220V AC (Single Phase)
Output Voltage: 220V
Output Current: 7A
Input Frequency:50-60Hz
Output Frequency:0-400Hz
Input phase: Single phase
Output phase: 3 phase
Size: 170 x 125 x 163mm
Control: By hand via built in control panel or via digital signal from controller board

2.2kW Air Cooled Spindle Kit Specification:

2.2kW Air cooled spindle kit. This kit includes the spindle, aluminium mounting bracket, VFD and 4 additional collets (3mm, 4mm, 6mm & 8mm).

Diameter: 80mm
Power: 2.2KW
Current: 10A
Voltage: 220V
Frequency: 0-400Hz
Speed: 10-24000rpm
Collet Size: ER20
Cooling: Air Cooled
Runout: 0.003mm - 0.005mm
Bearings: C7002 x 2, C7005 x 2
Collet size in spindle: 1/8' (3.175mm)
Additional collet sizes: 3mm, 4mm, 6mm & 8mm

VFD Specification:

Power: 2.2KW
Input Voltage: 220V AC (Single Phase)
Output Voltage: 220V
Output Current: 10A
Input Frequency:50-60Hz
Output Frequency:0-400Hz
Input phase: Single phase
Output phase: 3 phase
Size: 170 x 125 x 163mm
Control: By hand via built in control panel or via digital signal from controller board

2.2kW Water Cooled Spindle Kit Specification:

2.2kW Water-cooled spindle kit. This kit includes the spindle, aluminium mounting bracket, VFD, 4 additional collets (3mm, 4mm, 6mm & 8mm), water pump and 6m of water tubing.

Diameter: 80mm
Power: 2.2KW
Current: 10A
Voltage: 220V
Frequency: 0-400Hz
Speed: 10-24000rpm
Collet Size: ER20
Cooling: Air Cooled
Runout: 0.003mm - 0.005mm
Bearings: C7002 x 2, C7005 x 2
Collet size in spindle: 1/8' (3.175mm)
Additional collet sizes: 3mm, 4mm, 6mm & 8mm

VFD Specification:

Power: 2.2KW
Input Voltage: 220V AC (Single Phase)
Output Voltage: 220V
Output Current: 10A
Input Frequency:50-60Hz
Output Frequency:0-400Hz
Input phase: Single phase
Output phase: 3 phase
Size: 170 x 125 x 163mm
Control: By hand via built in control panel or via digital signal from controller board

3kw Air Cooled Spindle Kit:

3kW Air cooled spindle kit. This kit includes the spindle, aluminium mounting bracket, VFD and 4 additional collets (3mm, 4mm, 6mm & 8mm). The only thing you will need to run the spindle is the cable between the spindle and the VFD as well as the power cable to the VFD.

3kW Air-cooled Spindle for CNC machine. This is a 3-phase spindle designed to work with a 3kW or bigger Variable Frequency Drive (VFD). It has a built in ER20 Collet holder which can mount from 1mm to 13mm cutting bit shaft sizes. The rotor of the spindle is mounted with 2 bearings at the bottom of the spindle and 2 bearings at the the top, to ensure a long service life. The spindle is mounted to the gantry of the CNC machine with an aluminium bracket (sold separately). This spindle is perfect for milling and engraving of wood, plastic, foam, aluminium, brass, steel and even stone.

Diameter: 100mm
Power: 3KW
Current: 10A
Voltage: 220V
Frequency: 0-300Hz
Speed: 10-18000rpm
Collet Size: ER20
Cooling: Air Cooled
Runout: 0.003mm - 0.005mm
Bearings: C7003 & C7005
Collet size in spindle: 1/8' (3.175mm)
Additional collet sizes: 3mm, 4mm, 6mm & 8mm

3.7kW Variable Frequency Drive (VFD) to drive a CNC machine spindle. This drive can be controlled via hand or via a controller board. There are a wide range of settings to fine tune the way the spindle is controlled and also comes with a manual with more details of each setting. The VFD run off single phase 220V AC and the output is also 220V provided to the spindle. It also comes with self controlled built in cooling which switches on when required.

- Power: 3.7KW
- Input Voltage: 220V AC (Single Phase)
- Output Voltage: 220V
- Output Current: 17A
- Input Frequency:50-60Hz
- Output Frequency:0-400Hz
- Input phase: Single phase
- Output phase: 3 phase
- Size: 220 x 120 x 140mm
- Control: By hand via built in control panel or via digital signal from controller board

3kw Water Cooled Spindle Kit:

3kW Water-cooled spindle kit. This kit includes the spindle, aluminium mounting bracket, VFD, 4 additional collets (3mm, 4mm, 6mm & 8mm), water pump and 6m of water tubing. The only thing you will need to run the spindle is the cable between the spindle and the VFD, the power cable to the VFD and a water bath for the water pump.

3kW Water-cooled Spindle for CNC machine. This is a 3-phase spindle designed to work with a 3kW or bigger Variable Frequency Drive (VFD). It has a built in ER20 Collet holder which can mount from 1mm to 13mm cutting bit shaft sizes. The rotor of the spindle is mounted with 2 bearings at the bottom of the spindle and 2 bearings at the the top, to ensure a long service life. The spindle is mounted to the gantry of the CNC machine with an aluminium bracket (sold separately). This spindle is perfect for milling and engraving of wood, plastic, foam, aluminium, brass, steel and even stone.

Diameter: 100mm
Power: 3KW
Current: 10A
Voltage: 220V
Frequency: 0-400Hz
Speed: 10-24000rpm
Collet Size: ER20
Cooling: Water Cooled
Runout: 0.003mm - 0.005mm
Bearings: C7003 x 2, C7005 x 2
Collet size in spindle: 1/8' (3.175mm)
Additional collet sizes: 3mm, 4mm, 6mm & 8mm

3.7kW Variable Frequency Drive (VFD) to drive a CNC machine spindle. This drive can be controlled via hand or via a controller board. There are a wide range of settings to fine tune the way the spindle is controlled and also comes with a manual with more details of each setting. The VFD run off single phase 220V AC and the output is also 220V provided to the spindle. It also comes with self controlled built in cooling which switches on when required.

- Power: 3.7KW
- Input Voltage: 220V AC (Single Phase)
- Output Voltage: 220V
- Output Current: 17A
- Input Frequency:50-60Hz
- Output Frequency:0-400Hz
- Input phase: Single phase
- Output phase: 3 phase
- Size: 220 x 120 x 140mm
- Control: By hand via built in control panel or via digital signal from controller board

3kw Water Cooled ATC Spindle Kit, 50L Compressor, CW3-000 Water Chiller:

3kW Water Cooled Automatic Tool Change (ATC) Spindle for CNC machine. This is a 3-phase spindle designed to work with a 3kW or bigger Variable Frequency Drive (VFD). It is designed for the BT30 tool change handles and comes with 6 x BT30 handle for 3x 3mm & 3x6mm ER20 collet and 1 x pull stud. The ER20 collet sizes range from 1mm to 13mm.

The tool change mechanism is operated pneumatically and an included proximity sensor is to be mounted at the back of the spindle to monitor if the ATC mechanism is engaged or not.

- Diameter: 100mm
- Power: 3kW
- Voltage: 220V
- Rated frequency: 400Hz
- Maximum frequency: 1200Hz
- Number of poles: 8
- Rated speed: 6000rpm (@ 400Hz)
- ATC Handle: BT30
- Collet Size: ER20
- Cooling: Water Cooled
- Runout: 0.003mm - 0.005mm
- Brand: Lusintun

3.7kW Variable Frequency Drive (VFD) to drive a CNC machine spindle. This drive can be controlled via hand or via a controller board. There is a wide range of settings to fine tune the way the spindle is controlled and also comes with a manual with more details of each setting. The VFD runs off single phase 220V AC and the output provided to the spindle is also 220V. It comes with self controlled built in cooling which switches on when required.

Power: 3.7kW
Input Voltage: 220V AC (Single Phase)
Output Voltage: 220V
Output Current: 17A
Input Frequency:50-60Hz
Output Frequency:0-400Hz
Input phase: Single phase
Output phase: 3 phase
Size: 220 x 116 x 140mm
Control: By hand via built in control panel or via digital signal from controller board

50L Compressor 0.75kw (1Hp):

Tank Capacity: 50 L
Motor Output: 750 W (1 HP)
Outlet Air Flow: 2.1 CFM (60 L/MIN)
Max Tank Pressure: 7 BAR (102 PSI)
Amperage: 10 A
Compressor Type: Silent Oil Free
RPM: 1 450 RPM
Voltage: 230 V @ 50 HZ
Phase: Single Phase

CW-3000 Water Chiller:

CW-3000 industrial water chiller used to cool laser tubes or CNC spindles. The CW-3000 chiller uses a radiator and a fan to cool the water to the environment. The water is cooled to to a set temperature to ensure a constant working temperature. These chillers are recommended for a 80W and up laser tube when doing long production runs.

- Model Number: CW-3000AG
- Input Voltage: 220-240V
- Frequency: 50Hz
- Current: 0.7A (Maximum)
- Maximum pump Lift: 10m
- Nett Weight: 12kg (Approx)
- Machine size: 490 x 270 x 380mm (L x W x H)

Table Specifications:

50x50x2mm Square Tubing
Height of table: 900mm
Table painted black
Adjustable feet
Please note the pictures are for illustrative purposes only, final product may vary depending on the type and length of the machine selected