AXYZ1010B CNC Machine- DDCS Controller
1x1m CNC Machine Specs:
This machine is part of our production range, this machine is perfect for high work load and is perfect to cut material for extremely long hours. This Machine is perfect to cut aluminium, perspex, wood and other materials with high accuracy. Very good reliability with the DDCS Stand Alone Controller combination with it's ridged frame and aluminium extrusions. Including seven limit switches A+, A-, Y+, Y-, X+, X- and Z+ for the use as limits, homing and soft limits. With many upgradable options, electronically or mechanically like servo motors, 1.5kw or 2.2kw air cooled or water cooled spindle kits or lasers, you are in the front seat to get your ideal CNC Machine built to your requirements.
1x1m CNC Machine Features:
Footprint: 1000mm x 1000mm at the base *Stock size measured from base
Work Area: 800mm x 800mm x 100mm *Stock size
Cutting depth 50mm Depending on type of bit used.
Open ends allow pass through of longer materials.
All aluminium frame and steel front and back panels
5 cutting bits (1mm, 1.5mm, 2mm, 2.5mm, 3mm)
Collets 3mm, 6mm
DDCS 3.1 Stand Alone Controller (No Computer Connection Needed - All G-Code files will run from a usb memory stick - memry stick included)
Full linear rail management with ball screws for X & Y axis with cable drag chains
Lead screw and linear rail management for Z axis
Makita RT0700C 700w Router (12 month warranty from any Makita dealer) 6 months warranty
Manual Speed Controlled between 12 000 RPM – 30 000 RPM.
Maximum jog rate is 2000 mm/min
Maximum feed rate is 1000 mm/min
Auto homing
*The machine comes with a MDF wasteboard.
Requirements:
Personal computer or Laptop running Windows 7, 8 or 10.
USB port on computer - to save G-Code on USB memory stick
Free Downloadable Software & Free Downloadable Designing Program that's provided with the machine
Specifications:
4x Nema 23 stepper motors 30kg.cm
4 Axis Stepper Motor Driver Controller Board - DDCS 3.1 Controller with is a stand alone controller
HGR15 linear rails and SFU1605 ball screws on X & Y axis.
Dual motors on Y axis.
T8 8mm lead screw and HGR15 linear rails on Z axis
7x Proximity Sensors - 2 on each axis (A+, A-, Y+, Y-, X+, X-, Z+)
Configured resolution: less than 0.1mm
65mm Router Spindle Mount (suitable for Makita RT0700C).
MPG Pendant
Electronics Specifications:
4 Axis Stepper Motor Driver Controller Board - DDCS Stand Alone Controller - No License Key Needed.
24V 4.5A 250W Power Supply
230v AC Power Socket - Power Cable Provided
Emergency Stop Button
All connecting fittings and cables
- Compulsory delivery, setup and minimal training of the machine at additional costs to the customer - within South Africa only.
- Delivery Time For Gauteng And Surrounding Provinces 3-5 Weeks Lead Time
- Delivery Time For Northern, Eastern & Western Cape 5-8 Weeks Lead Time
The machine can be upgraded with the following: 1.5kw Air Cooled Spindle Kit | 1.5kw Water Cooled Spindle Kit | 2.2kw Air Cooled Spindle Kit | 2.2kw Water Cooled Spindle Kit | X & Y Stepper Motor Upgrade | X, Y & Z Stepper Motor Upgrade | Closed Loop Stepper Motors Upgrade| Table
UPGRADES:
1.5kW Air Cooled Spindle Kit Specification:
1.5kW Air cooled spindle kit. This kit includes the spindle, aluminium mounting bracket, VFD and 4 additional collets (2mm, 3mm, 4mm & 6mm).
- Diameter: 65mm
- Power: 1.5kW
- Current: 7A
- Voltage: 220V
- Frequency: 0-400Hz
- Speed: 10-24000rpm
- Collet Size: ER11
- Cooling: Air Cooled
- Runout: 0.003mm - 0.005mm
- Bearings: C7002 x 2, C7002 x 2
- Collet size in spindle: 1/8' (3.175mm)
- Additional collet sizes: 2mm, 3mm, 4mm & 6mm
- Power: 1.5KW
- Input Voltage: 220V AC (Single Phase)
- Output Voltage: 220V
- Output Current: 7A
- Input Frequency:50-60Hz
- Output Frequency:0-400Hz
- Input phase: Single phase
- Output phase: 3 phase
- Size: 170 x 125 x 163mm
- Control: By hand via built in control panel or via digital signal from controller board
1.5kW Water Cooled Spindle Kit Specification:
1.5kW Water-cooled spindle kit. This kit includes the spindle, aluminium mounting bracket, VFD, 4 additional collets (2mm, 3mm, 4mm & 6mm), water pump and 6m of water tubing.
- Diameter: 65mm
- Power: 1.5kW
- Current: 7A
- Voltage: 220V
- Frequency: 0-400Hz
- Speed: 10-24000rpm
- Collet Size: ER11
- Cooling: Water Cooled
- Runout: 0.003mm - 0.005mm
- Bearings: C7002 x 2, C7002 x 2
- Collet size in spindle: 1/8' (3.175mm)
- Additional collet sizes: 2mm, 3mm, 4mm & 6mm
- Power: 1.5KW
- Input Voltage: 220V AC (Single Phase)
- Output Voltage: 220V
- Output Current: 7A
- Input Frequency:50-60Hz
- Output Frequency:0-400Hz
- Input phase: Single phase
- Output phase: 3 phase
- Size: 170 x 125 x 163mm
- Control: By hand via built in control panel or via digital signal from controller board
2.2kW Air Cooled Spindle Kit Specification:
2.2kW Air cooled spindle kit. This kit includes the spindle, aluminium mounting bracket, VFD and 4 additional collets (3mm, 4mm, 6mm & 8mm).
- Diameter: 80mm
- Power: 2.2KW
- Current: 10A
- Voltage: 220V
- Frequency: 0-400Hz
- Speed: 10-24000rpm
- Collet Size: ER20
- Cooling: Air Cooled
- Runout: 0.003mm - 0.005mm
- Bearings: C7002 x 2, C7005 x 2
- Collet size in spindle: 1/8' (3.175mm)
- Additional collet sizes: 3mm, 4mm, 6mm & 8mm
- Power: 2.2KW
- Input Voltage: 220V AC (Single Phase)
- Output Voltage: 220V
- Output Current: 10A
- Input Frequency:50-60Hz
- Output Frequency:0-400Hz
- Input phase: Single phase
- Output phase: 3 phase
- Size: 170 x 125 x 163mm
- Control: By hand via built in control panel or via digital signal from controller board
2.2kW Water Cooled Spindle Kit Specification:
2.2kW Water-cooled spindle kit. This kit includes the spindle, aluminium mounting bracket, VFD, 4 additional collets (3mm, 4mm, 6mm & 8mm), water pump and 6m of water tubing.
- Diameter: 80mm
- Power: 2.2KW
- Current: 10A
- Voltage: 220V
- Frequency: 0-400Hz
- Speed: 10-24000rpm
- Collet Size: ER20
- Cooling: Air Cooled
- Runout: 0.003mm - 0.005mm
- Bearings: C7002 x 2, C7005 x 2
- Collet size in spindle: 1/8' (3.175mm)
- Additional collet sizes: 3mm, 4mm, 6mm & 8mm
- Power: 2.2KW
- Input Voltage: 220V AC (Single Phase)
- Output Voltage: 220V
- Output Current: 10A
- Input Frequency:50-60Hz
- Output Frequency:0-400Hz
- Input phase: Single phase
- Output phase: 3 phase
- Size: 170 x 125 x 163mm
- Control: By hand via built in control panel or via digital signal from controller board
Nema 23 x 115mm Stepper Motor Specifications:
- Size: NEMA 23 (57mm x 57mm)
- Length: 112mm
- Step angle: 1.8 Degrees
- Rated voltage: 6.3V
- Current/Phase: 3A
- Resistance/Phase: 2.1 Ohm
- Inductance/Phase: 9mH
- Holding Torque: 30kg.cm
- Number of leads: 4
- Rotor inertia: 810g.cm^2
- Weight: 1.63kg
Closed Loop Stepper Motors Specifications:
- Motor Size: NEMA 23
- Torque: 2.2Nm
- No Load top speed: 2000 RPM
- Full Load top speed: 1000 RPM
- Encoder: Mounted to motor
- Cables: 3 meter motor and encoder cables attached to motor
- Supply voltage: 16 - 70V DC
- Recommended power supply size: 200w or bigger
- Micro stepping: Can be set between 200 and 51200 steps/rev
- Motor Model Number: 57HSE2.2N-D24-3M
- Driver Model Number: HBS57
Table Specifications:
- 50x50x2mm Square Tubing
- Height of table: 900mm
- Table painted black
- Adjustable feet
- Please note the pictures are for illustrative purposes only, final product may vary depending on the type and length of the machine selected